4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
EO18-33012B
(Revision Date Apr. 24, 2008)
4.22 RFID MODULE (B-SX704-RFID-U2-EU-R)
4-149
Continued from the previous page.
Continued to the next page.
<10>RFID
R CYCLE TIM 4.0
Read retry timeout setting menu is displayed.
Set the timeout period during which RFID tag read retries are allowed, with the
[FEED]
or
[RESTART]
key. If the printer has retried for the max. number of times within the RFID read
retry timeout, the printer stops the retries at the time.
Whenever the printer writes data onto an RFID tag, the tag is read first. The read retry
timeout set by this parameter becomes also effective in this pre-read.
[RESTART]
[FEED]
9.9 (9.9 sec.)
•
•
•
4.0 (Default)
•
•
0.0 (0.0 sec.)
[PAUSE]
<10>RFID
W CYCLE CNT 5
Press the
[PAUSE]
key.
Max. number of write retries setting menu is displayed.
Set a maximum number of retries to write data onto an RFID tag.
The printer retries to write data onto an RFID tag for up to specified number of times. If the
timeout period expired before the max. number of retries have been done, the printer stops
the retries at the time.
Set the max. number of times with the
[FEED]
or
[RESTART]
key.
[RESTART]
[FEED]
255
•
•
•
5 (Default)
•
•
0
[PAUSE]
Press the
[PAUSE]
key.
<10>RFID
W CYCLE TIM 2.0
[PAUSE]
Write retry timeout setting menu is displayed.
Set the timeout period during which RFID tag write retries are allowed, with the
[FEED]
or
[RESTART]
key.
If the printer has retried for the max. number of times within the RFID write retry timeout, the
printer stops the retries at the time.
[RESTART]
[FEED]
9.9 (9.9 sec.)
•
•
•
2.0 (Default)
•
•
0.0 (0.0 sec.)
Press the
[PAUSE]
key.
<10>RFID
ADJ RETRY +00
RFID adjustment for retry menu is displayed.
If writing data on a tag failed, the printer feeds the RFID tag forward or backward for specified
length in order to retry writing data. When “0” is set for this parameter, this function and a retry
are not performed.
Only the value of –3mm or less or +3mm or more becomes effective.
Set a value to move the RFID tag position with the
[FEED]
or
[RESTAT]
key.
[PAUSE]
[RESTART]
[FEED]
+99 (99mm) Reverse feed
•
•
•
+00 (Default)
•
•
-99 (-99mm) Forward feed
Press the
[PAUSE]
key.
