4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
EO18-33012B
(Revision Date May 29, 2008)
4.23 RFID MODULE (B-SX704-RFID-U2-AU-R)
4-179
2
）
Start the printer in the system mode and perform a read test to measure the AGC value.
To measure the AGC value, place only one RFID tag on the Antenna.
Example
RFID Tag
Read test menu is displayed.
Press the
[FEED]
or
[RESTAT]
key to choose “READ TEST ON”.
[RESTART]
<10>RFID
<1>DIAG. V4.5
[PAUSE]
[FEED] or [RESTAT]
Turn the printer on while holding down the
[FEED]
and
[PAUSE]
keys at the same time.
When “<1>DIAG. V4.5” is displayed, press the
[RESTART]
key.
<10>RFID
READ TEST OFF
When ”<10>RFID” is displayed, press the
[PAUSE]
key until the Q value setting menu is
displayed.
<10>RFID
Q VALUE 2
Choose “2” with the
[FEED]
or
[RESTART]
key.
Press the
[PAUSE]
key and turn off the printer.
[PAUSE]
<10>RFID
WT AGC 0
Turn the power off.
Turn the printer on while holding down the
[FEED]
and
[PAUSE]
keys at the same time.
[RESTART]
<1>DIAG. V4.5
<10>RFID
[PAUSE]
Continued to the next page.
When “<1>DIAG. V4.5” is displayed, press the
[RESTART]
key.
When “<10>RFID” is displayed, press the
[PAUSE]
key.
