manualshive.com logo in svg

Toshiba TEC B-SX4T Series, Maintenance Manual

Share
Download
Toshiba TEC B-SX4T Series Maintenance Manual Download Page 139

4.  INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT 

EO18-33012B 

(Revision Date May 18, 2006)

 

4.21 WIRELESS LAN MODULE (B-9700-WLAN-QM-R)

 

 

4-122

 

4.21  WIRELESS LAN MODULE (B-9700-WLAN-QM-R)

 

 
 
 
 
 
 
 
 
 

 

4.21.1 Applicable Model 

This optional device is the fan fold paper guide, which is intended for the following models: 

B-SX4T-QM-R Series, B-SX5T-QM-R Series 

 

4.21.2 Packing List 

All the following parts are supplied with the kit.  Make sure you have all items shown below. 

Wireless LAN Board (1 pc.) 

 
 
 
 
 
 
 
 

Antenna Cover (1 pc.) 

 

 
 
 
 
 
 
 

SMW-3x6 Screw (3 pcs.) 

 
 
 
 
 
 
 
 

Installation Manual (1 copy) 

 
 
 
 
 
 
 
 

WLAN Support Plate (1 pc.) 
 
 
 
 
 
 
 
 

FCC/IC Sticker (1 pc.) 
 
 
 
 
 
 
 
 

 

 

 

 

WARNING!

1. Follow all manual instructions.  Failure to do so could create safety hazards such as fire or 

electrocution.  

• 

Manual instructions must be followed when installing option kits or adding cables to avoid 

system failures and to insure proper performance and operation.  

• 

Failure to follow manual instructions or any unauthorized modifications, substitution or change 

to this product will void the limited product warranty. 

2.  Turn the power off and disconnect the power cord before installing the wireless LAN board.  

 

Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es

Summary of Contents for TEC B-SX4T Series
































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands