Toshiba Strata CT, Installation & Maintenance Manual

Page: 41 / 385

Strata CT Installation
Strata CT I&M Manual October 2000
2-5
Cabinet Installation Considerations
The Base (CHSUB672) and Expansion (CHSUE672) Cabinets can be wall or floor mounted.
To make it easier to add cabinets (after the initial installation) when a customer needs to
expand, install the Base Cabinet on top for wall-mount installations and on the bottom for
floor-mount installations.
The dimensions of the Base and Expansion Cabinets are:
Height: Base Cabinet: 11 3/4 inches
Height: Expansion Cabinet/Remote Expansion Cabinet: 10 inches
Width: 26 1/2 inches
Depth: 10 5/8 inches
Weight: approx. 30.5 lbs. (14 kg.)
Note
The weight approximates a cabinet completely filled with PCBs. Weight may vary
slightly, depending on PCBs.
Recommended Installation Sequence
Note
Each cabinet requires four wood screws (#12X 1.25 inch size) for wall mount
installation. Wood screws are not provided with the system.
Step Reference Information
1. Install power supplies in cabinets.
“Install Power Supply” on Page 2-6 .
2. Mount cabinets on wall or floor. “Wall Mounting the Base (Top) Cabinet” on
Page 2-9
.
“Cabinet Floor Mounting” on Page 2-26 .
3. Install earth wiring.
“Earth the System” on Page 2-17 .
4. Install AC power cabling to cabinets.
“Install AC Power Components” on Page 2-18 .
5. Install reserve power cabling.
“Install Reserve Power” on Page 2-22 .
6. Install PCBs and PCB cabling. Figures 2-24 ~ 2-30 , 2-35 and the section titled
“Install Universal and Processor PCBs” on Page
2-35 .
H
C