Toshiba Strata CT, Installation & Maintenance Manual

Page: 17 / 385

Strata CT Configuration
Strata CT I&M Manual October 2000
1-3
Processor PCB Subassemblies
Subassemblies required for some features can be added to the processor PCBs. These are
described in the following paragraphs.
DTMF Receiver Subassembly (BRCS)
The BRCS is required to translate DTMF tones needed for DISA, Tie, voice mail, AA
announcement devices, DTMF standard telephones, and other devices.
The BRCS attaches to the processor PCB and is available with either 4, 8, or 12 (BRCS-4, -8
or -12) shared receiver circuits. See
Table 1-5 on Page 1-6 for more information.
RKYS Feature Key Upgrades
The system can be upgraded for built-in AA, Automatic Call Distribution (ACD), Software
Management Information System (SMIS) and Insight DK with the following feature keys
that attach to the processor. See
Table 1-3 for features provided by RKYS2~4
.
Table 1-3
RKYS Features
* Enhanced ACD with MIS data information.
1
Built into all Processors as standard.
Cabinet Slots
Base Cabinet
The Base Cabinet has two slots reserved for the system processor PCBs and eight universal
slots, labeled “S101~S108,” that can accommodate station, line or option PCBs (
see
Figure 1-2 ). It also houses a power supply described later in this chapter.
Figure 1-2 Strata CT Base Cabinet Interior
Features Provided to all Strata CT Processors RKYS1
1
RKYS2 RKYS3 RKYS4*
Built-in Auto Attendant X X X X
ACD X X X
ACD with MIS data information X X
POW
+5V
-5V
P.F.
RESET
EXP
BASE
AC IN
BATT
DC OUT
-24V1
-24V2
-24V3
-24V4
+
-
POWER
ON
OFF
FG
5002
B101 B102 S101 S102 S103 S104 S105 S106 S107 S108
5037 CT I&M
B101 B102 S101 S102 S103
S104 S105 S106 S107 S108
H
C