Toshiba Qosmio G40 Maintenance Manual Download Page 179

Page: 179 / 458

3.20 ONLY ONE TEST

3 Tests and Diagnostics

QOSMIO G40 Maintenance Manual (960-632)

[CONFIDENTIAL]

3-43

OK message appears in the display if the test ends without a defective.

NG message appears in the display if a defective is found during the test.
Confirm the connection of cable, then execute the test again.

Press

and return to ONLY ONE TESST menu.

Subtest 05

LED

This subtest checks if each LED lights properly.

The following message appears in the display in order. Follow the instructions
in the display to execute the test.

[HDD Access LED test]

Confirm the LED of HDD status blinks properly.

Press any key and following message appears in the display.

[Caps/Num/Overlay BT/W-LAN LED test]

Confirm each LED lights properly.

(1)

Press [Caps Lock ] key ! ...Caps (on/off)

(2)

Press [Fn + F10 ] key ! ...Arrow (on/off)

(3)

Press [Fn + F11 ] key ! ...Num (on/off)

(4)

Slide [BT/W-LAN switch L&R]!

(on/off)

Press

Enter

and following message appears in the display.

Check [PowerSW-LED]= Green

Check if the Power Switch LED lights in the following order.
(Green -> Orange -> Blue -> OFF)

Press any key and following message appears in the display.

Check [DC-IN]&[Power]&[Main Battery]LED= Green

Check if the each LED lights in the same color as the message in the display
(Message switches

Green

<->

Orange

Press

Enter

and return to the ONLY ONE TEST menu.

Downloaded from LpManual.com Manuals

Summary of Contents for Qosmio G40











































































































































































































































































































































































































































































Search results

Summary of Contents for Qosmio G40

Reviews:

Related manuals for Qosmio G40

Brands by name

Popular brands

Toshiba Qosmio G40, Maintenance Manual

Search results

Summary of Contents for Qosmio G40

Reviews:

Related manuals for Qosmio G40

Brands by name

Popular brands