Toshiba MMY-MAP0806HT7(J)P, Service Manual

Page: 182 / 350

Check code
Location
of
detection
Description System status
Error detection
condition(s)
Check items (locations)
Main
remote
controller
Outdoor 7-segment display
Check
code
Sub-code
L29 L29
I/F Error in No. of
IPDUs All stop Insufficient number of IPDUs
are detected when power is
turned on. • Check model setting of
P.C. board for servicing
outdoor I/F P.C. board.
• Check connection of UART
communication connector.
• Check A3-IPDU, fan IPDU,
and I/F P.C. board for
defect.
L30 L30
Detected indoor address Indoor
unit External
interlock of
indoor unit Stop of
corresponding
unit • Signal is present at
external error input
terminal (CN80) for 1
minute.
When external device is
connected to CN80
connector:
1) Check for defect in
external device.
2) Check for defect in indoor
P.C. board.
When external device is not
connected to CN80
connector:
1) Check for defect in indoor
P.C. board.
– L31 –
I/F Extended IC
error Continued
operation There is part failure in P.C.
board (I/F). Check outdoor P.C. board
(I/F).
P01 – –
Indoor
unit Indoor fan
motor error Stop of
corresponding
unit • Check the lock of fan motor
(AC fan).
• Check wiring.
P03 P03 –
I/F Discharge
temperature
TD1 error All stop Discharge temperature (TD1)
exceeds 115°C. • Check outdoor service
valves (gas side, liquid
side) to confirm full
opening.
• Check outdoor PMVs
(PMV1,
3
) for clogging.
• Check resistance
characteristics of TD1
sensor.
• Check for insufficiency in
refrigerant quantity.
• Check for defect in 4-way
valve.
• Check for leakage of SV4
circuit.
• Check SV4 circuit (wiring
or installation error
in SV41
or SV4
2
).
Circle (O): Faulty IPDU
1 2 1 2 1 2 1 2
01 ○ 10 ○
02 ○ 11 ○ ○
03 ○ ○ 12 ○ ○
08 ○ 13 ○ ○ ○
09 ○ ○ 18 ○ ○
0A ○ ○ 19 ○ ○ ○
0B ○ ○ ○ 1A ○ ○ ○
1B ○ ○ ○ ○
A3-IPDU A3-IPDU Fan-IPDU Fan-IPDU
− 1 8 1 −