Software Access Point
Utilities
358
3
The setup page displays.
Setting authentication information
❖
Add or change the user name and password
The htpasswd command is used to add or register a new user name and to change the
password for the preset user name. Either setting can be made using the same
operation.
When adding the user name tsap, for example, log in by root and execute the following
command.
The system processes interactively and proceeds to the password entry and password
reentry (for confirmation).
If the password is correctly entered, adding or registering a new user name or changing
the password for the preset user name ends here.
When the password is changed, the last message is as follows:
❖
Deleting registered user name and password
To delete a registered user name and its password, the setup file needs to be directly
edited. The setup file is /etc/sysconfig/tsb/.htpasswd. In the setup file, one use is
indicated on one line as follows.
(User name):(Encrypted password)
NOTE: The user name and password flow over the network which may lead to
information interception. When using this product in a network environment where
security cannot be ensured, use the setup page with the WEB browser started on
the server (local computer). For the network security, consult with your network
administrator.
When authentication is completed, it remains valid until the WEB browser is closed.
# htpasswd /etc/sysconfig/tsb/.htpasswd tsap
# htpasswd /etc/sysconfig/tsb/.htpasswd tsap
New password:
Re-type new password:
Adding password for user tsap
? Enter the password here (not displayed).
? Reenter the password here (not displayed).
# htpasswd /etc/sysconfig/tsb/.htpasswd tsap
New password:
Re-type new password:
Updating password for user tsap
? Enter the password here (not displayed).
? Reenter the password here (not displayed).
