manualshive.com logo in svg

Toshiba Magnia Z310, User Manual

Share
Download
Toshiba Magnia Z310 User Manual Download Page 230

IDE MegaRAID Configuration Console

Installation

  230

The SPYSER program displays as SpySer in the list. This window displays the status of 
the program and whether the program starts automatically or manually.

Installation

The computer must have the following before installing the MegaRAID Configuration 
Console. You will need to install some OS items before you install the MegaRAID 
Configuration Console, as shown below:

Supported Internet Browsers 

The following Internet Browsers support the MegaRAID Configuration Console:

❖

Internet Explorer 5.x or greater

❖

Netscape 4.0 or greater

❖

Opera 5.2 or greater

NOTE: The Services icon is available only on Microsoft Windows NT and Microsoft 
Windows 2000 based computers.

Service Pack 

Internet 

browser

Java Runtime 

Environment

(JRE)

Windows NT 4

5 or greater

Yes

JRE 1.2 or greater

Windows 2000

No

Yes

JRE 1.2 or greater

Linux

No

Yes

JRE 1.2 or greater

Solaris

No

Yes

JRE 1.2 or greater

Summary of Contents for Magnia Z310



































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands