Toshiba Magnia 550D, User Manual

Page: 99 / 241

Hardware Diagnostics
Hardware Diagnostics Program
99
❖
10. CD-ROM TEST checks the computer's CD-ROM functions
Insert the Magnia 550D Software and Documentation CD-ROM for this test.
- 01. Sequential Address Read subtest is a sequential reading of one block unit of all
the logical addresses.
- 02. Random Address Read subtest reads data at random addresses.
For the error log information, refer to Log Utilities for the SCSI HDD TEST.
❖
11. SAF-TE TEST checks the SAF-TE function and the status LED of the hard disk
drives.
- 01. SAF-TE test detects the SAF-TE controller and checks the operation by flashing
the LED for each hard disk drive.
The test detects the SAF-TE controller first and shows the connecting destination of
the detected SAF-TE controller (host number, SCSI ID, and channel number) with
model name. For example:
--HT-ID----CH--VENDOR-PRODUCT-------FAN-PS--SLOT
XX XX XX XXXXX XXXX XX XX XX
After detecting the SAF-TE controller, the following message displays:
SAF-TE LED Steady ON (Faulty Flag) Hit any key
Check that all LEDs of the hard disk drives are lit orange. Then press Enter.
The following message displays:
SAF-TE LED Blinking (Rebuilding Flag) Hit any key
Check that all LEDs for the hard disk drives are flashing orange. Then press Enter.
The following message displays:
SAF-TE LED Steady ON (Rebuild Interrupted) Hit any key
Check that all LEDs for the hard disk drives are lit orange. Then press Enter.
The following message displays:
SAF-TE LED Blinking (Rebuilding Flag) Hit any key
Check that all LEDs of the hard disk drives are flashing orange. Then press Enter.
The following message displays:
SAF-TE LED Reset (No Error Flag) Hit any key
Check that all LEDs of the hard disk drives are off. Then press Enter.