manualshive.com logo in svg

Toshiba Magnia 550D, User Manual, Page: 139 / 241

Share
Download
Toshiba Magnia 550D User Manual Download Page 139

Server Setup Tool

Starting SST

  139

5

Select the Create Floppy Disks option. The list of diskettes that can be created are 
listed:

❖

Startup

❖

DOS

❖

Hardware diagnostics

❖

Adaptec SCSI Windows 2000 Driver

❖

D-Link LAN Windows 2000 Driver

❖

Adaptec SCSI Windows NT Driver

❖

D-Link LAN Windows NT Driver

Select one of the options from the list.

6

Click Create. 

Create Floppy Disks screen

7

Insert a blank diskette, and click OK.

8

After creating the diskettes, you need to label them. To check label descriptions, 
select Detail and then Create Floppy Disks. For more information, refer to the SST 
online Help.

Post Installation (Windows 2000)

After installing Windows 2000 Server:

1

Start Windows 2000 Server and log on as an administrator (or a user with 
administrator rights).

2

If no network has been created, set up the network.

3

Set up the TCP/IP for the network, as necessary. For procedures, refer to the 
Windows 2000 Server First Step Guide or Help.

Summary of Contents for Magnia 550D


















































































































































































































































Reviews:

No comments