manualshive.com logo in svg

Toshiba Magnia 550D, User Manual, Page: 125 / 241

Share
Download
Toshiba Magnia 550D User Manual Download Page 125

Server Setup Tool

Starting SST

  125

1

Enter an IP Address. 

2

Enter a Subnet Mask.

3

Enter the Default Gateway Address.

To have the domain server automatically assign the IP addresses, Subnet Masks and 
Default Gateway to your computer, select Assign an IP Address from DHCP 
Server.

4

After making your entries, click Next.

DNS/WINS Setting

After completing the settings on the TCP/IP Protocol Settings screen, the DNS/WINS 
Setting screen appears. This screen allows you to specify the Primary DNS Server 
Address, Secondary DNS Server Address, Primary WINS Server Address and 
Secondary WINS Server Address for an on-board LAN Controller.

DNS/WINS Setting screen

❖

If you are using the Domain Name System (DNS), enter the IP address for each of 
the DNS Servers in the Primary DNS Server and Secondary DNS Server fields. 

❖

If you are using the Windows Name Service (WINS), enter the IP address for each of 
the WINS Servers in the Primary WINS Server and Secondary WINS Server fields.

❖

After making your entries, click Next.

Summary of Contents for Magnia 550D


















































































































































































































































Reviews:

No comments