manualshive.com logo in svg

Toshiba Magnia 550D, User Manual, Page: 56 / 241

Share
Download
Toshiba Magnia 550D User Manual Download Page 56

Connecting Components

Adding SCSI I/O devices

  56

SCSI ID

The ID of the installed SCSI device must be different from the IDs of other devices. Refer 
to the device manuals for more information.

Termination

The cable shipped from Toshiba is terminated, so there is no need to terminate the 
device.

Installing SCSI devices

You can install up to three 5.25-inch internal SCSI devices in the 5.25-inch device bays. 

1

Remove the front and side panels. For instructions, see 

Removing and replacing the 

server panels

 on page 33.

2

Set the SCSI-ID of the SCSI device.

3

Position the rails on the SCSI device and secure them with four screws. Use “Screw 
B” designated in the table 

Toshiba supplied hardware items

 on page 32.

 

Installing the rails for a SCSI device

4

Remove the screws securing the 5.25-inch shield cover and store the cover for 
possible reuse.

 

Removing the shield

Summary of Contents for Magnia 550D


















































































































































































































































Reviews:

No comments