Toshiba Magnia 550D, User Manual

Page: 33 / 241

Connecting Components
Removing and replacing the server panels
33
Removing and replacing the server panels
To access the CPU slots, memory module slots, expansion slots, and device bays, you
need to remove both the front door panel and the side panel.
The front door panel should always be detached first, followed by the side panel. To
replace them, reverse the order of removal.
Removing the front door panel
To remove the front door panel, proceed as follows:
1 Shut down and turn off the server if it is in operation. For procedures, refer to
Turning off the server on page 62.
2 Unplug the power cable from the AC outlet.
3 Unlock the key-lock.
4 Pull down the latch of the lower front door panel, and pull it toward you.
The lower front door panel detaches.
Removing the front door panel
NOTE: Do not remove the front door panel forcibly. Doing so may cause damage to
the plastic hooks and make it impossible to replace the front door panel.