manualshive.com logo in svg

Toshiba Magnia 550D, User Manual, Page: 23 / 241

Share
Download
Toshiba Magnia 550D User Manual Download Page 23

Getting Started

System overview 

23

❖

The Link Speed light (100M) indicates the communication speed.

❖

The LINK/ACT indicates the power and link status.

Inside the server

❖

Motherboard - The motherboard can accommodate up to two CPU modules and five 
PCI expansion cards.

❖

5.25-inch device bays - This device has four bays which are accessible from the front 
of the server (one has a CD-ROM drive installed). The server supports built-in SCSI 
devices.

❖

Memory slots - The server has four memory slots that support 64 MB, 128 MB, 256 
MB, and 512 MB modules. See “

Memory modules” on page 43

 for more information.

On:

Communication at 100 Mbps

Off:

Communication at 10 Mbps

On:

Power is being supplied to the card 
and a good connection exists 
between the card and the device it 
is connected to

Off:

Power is not being supplied

Flashing:

Data is being sent or received

Internal battery

Expansion 

Motherboard

CPU sockets

slots

5.25-inch 
device bays

3.5-inch 
device bays

Cooling fan

Cooling fan 

Memory slots

Power supply 

Video card

LAN card

(optional)

Summary of Contents for Magnia 550D


















































































































































































































































Reviews:

No comments