manualshive.com logo in svg

Toshiba Magnia 550D, User Manual, Page: 156 / 241

Share
Download
Toshiba Magnia 550D User Manual Download Page 156

Management Software

Before Installing Harness Eye/web

  156

Agent

Before Installing Harness Eye/web

This section describes the HarnessEye/web installation procedure. Keep the following 
points in mind:

❖

RAID configuration information is available only if the RAID controller card, driver and 
SNMP agent software are installed, properly configured and running on the server at 
the time of HEW Agent installation. For the installation procedures, refer to the 
respective manuals.

❖

To install SNMP, follow the procedures specific to each OS. For details, refer to the 
applicable OS manual.

❖

To enable an Agent to output SNMP traps or display Agent information on the 
Management Console, the SNMP properties must be properly set up prior to the 
installation of the Agent.

Before Installing the Management Proxy

SNMP Settings

1

Install the SNMP Service on the Magnia Server selected to function as a 
Management Proxy.

2

Open the SNMP Service Properties dialog box.

Supported

Magnia 550D

OS

Windows NT 4.0 Server (Service Pack 4 or later)

Windows 2000 (Server or Advanced Server)

Summary of Contents for Magnia 550D


















































































































































































































































Reviews:

No comments