Toshiba Magnia 550D, User Manual, Page: 60 / 241

Connecting Components
Connecting peripherals
60
Removing expansion cards
1 Remove the front and side panels. For instructions, see Removing and replacing the
server panels on page 33.
2 Remove the screw securing the expansion card to the server chassis. Save the
screw for future use.
3 Grasp the expansion card firmly and lift it carefully to separate it from the expansion
card connector on the system board. Place the expansion card in an antistatic bag.
4 Insert the expansion slot cover in the opening to the expansion slot.
5 Reinstall the bezel and side panel. For instructions, see Removing and replacing the
server panels on page 33.
Connecting peripherals
The server has sockets on the back for connecting a keyboard, a mouse, a monitor, a
printer, or other peripheral devices.
Connect peripherals before the turning on the server.
To connect peripherals:
1 Turn off the server and any connected peripheral devices.
2 Unplug all power from the server and any connected peripheral devices.
WARNING: Use genuine Toshiba peripherals or recommended equivalents, and
refer to the manuals supplied with them. Some peripherals and interface cables that
aren’t recommended may pose a fire hazard. Consult your authorized service repair
office or sales office for recommended optional devices.
NOTE: Some peripherals and interface cables made by other companies are
unsuitable for connection to the server. Check that these devices can be used with
the server before purchasing them.
To plug or unplug the interface cables, hold them securely by the connector.
If you have any questions, refer to the manufacturer’s user’s guide.