JUNE 2002 © TOSHIBA TEC
2 - 9
e-STUDIO550/650/810 ERROR CODES AND SELF-DIAGNOSIS
State transition diagram of self-diagnosis modes
Normal
Warming up
Standby
[CLEAR]
Control panel
check mode
[0][1]
[0][3]
[0][5]
Setting
mode
Adjustment
mode
Test mode
*1
In the “Control panel check mode”, copying is disabled. Enter the standby state by pressing the
[CLEAR] key to start copying.
*2
Turn OFF the power after using the self-diagnosis mode, and leave the copier to the user.
[POWER]
ON
Test print
mode
[POWER]
OFF
To user
*2
[0][8]
[0][4]
[9][START]
List print
mode
PM support
mode
[6][START]
• Test mode (03): Refer to “2.2.1. Input check (test mode 03)” and “2.2.2. Outpout check (test mode 03)”.
• Test print mode (04): Refer to “2.2.3. Test print mode (04)”.
• Adjustment mode (05): Refer to “2.2.4. Adjustment mode (05)”.
• Setting mode (08): Refer to “2.2.5. Setting mode (08)”.
• List printing mode (9S):
• PM support mode (6S):
• Firmware update mode (39): Refer to “6. FIRMWARE UPDATING”.
[9] [START]
[POWER]
101: Adjustment mode(05)
102: Setting mode(08)
103: PM support mode
[START]
(List starts to be printed)
[POWER] OFF/ON
(Exit)
[6] [START]
[POWER]
(code)
[POWER] OFF/ON
(Exit)
1: Auto-toner adjustment
2: PM management screen
[START]
(Operation started)
*1
(code)
Firmware
update mode
[3][9]