e-STUDIO550/650/810 TROUBLE SHOOTING
5 - 52
JUNE 2002 © TOSHIBA TEC
[ECA] Paper remaining at the inserter when the power is ON
Is there any paper remaining at the inserter transport path?
Remove the paper.
Are the separation sensor, reverse path sensor and transport sensor working improperly?
Replace the sensors.
Replace the inserter control board.
[ECB] Inserter size difference jam
Is the paper size on the inserter tray consist with the size set at the copier control panel?
Set the same paper size as that on the tray.
Is the separation sensor working improperly?
Replace the separation sensor.
Perform the width adjustment of the inserter tray side guide.
[ECC] Inserter feeding jam
Is the condition improved when the copier power switch is turned OFF/ON?
1. Replace the copier LGC board.
2. Replace the IPC board.
3. Replace the inserter control board.
NO
YES
NO
YES
NO
YES
NO
YES
NO