e-STUDIO550/650/810 TROUBLE SHOOTING
5 - 44
JUNE 2002 © TOSHIBA TEC
[EA8] Saddle stitcher stapling jam
Is there any paper remaining on the transport path in the finisher, saddle stitcher section or main
unit, or on the stapling tray?
YES
Remove the paper.
NO
Is the jam cleared by taking off the staple cartridge from the finisher and removing the staples stuck
in the stapling unit?
YES
End
NO
Is the connector J8 on the saddle stitcher controller PC board disconnected?
Is the harness connecting the saddle stitcher controller PC board and stitcher home position switch
(rear: MS5S, front: MS7S) open-circuited?
YES
Connect the connector securely. Replace the harness.
NO
Are the stitcher home position switches working properly?
NO
1. Connect the connectors of the stitcher home position switches securely.
2. Replace the stitcher home position switches.
YES
Replace the saddle stitcher controller PC board.