e-STUDIO550/650/810 ADJUSTMENT
3 - 34
June 2002 © TOSHIBA TEC
3. 8. Adjustment of Developer Unit
(1) Doctor-sleeve gap
The doctor-sleeve gap is set by putting both edges
of the doctor blade against the protrusions of the
front and rear side frames and fixing the blade.
Therefore, the adjusment of the gap is not
necessary.
(2) Drum-sleeve gap
The drum-sleeve gap is set by putting the guide
rollers of the developer unit against the cleaner
unit. Therefore, the adjustment of the gap is not
necessary.
(3) Pole position of the developer sleeve
The pole positions of the developer sleeves are
set by installing the sleeve holders and pole
position fixing bushings. Therefore, the adjustment
of the pole position is not necessary.
Doctor blade
Protrusion