JUNE 2002 © TOSHIBA TEC
3 - 41
e-STUDIO550/650/810 ADJUSTMENT
A
B
C
3. 11. 3. Adjustment of solenoid
(1) Disengagement solenoid
To install the solenoid, put the end faces of the
bracket and solenoid together and fix the sole-
noid with two screws at the position (A) and (B).
When the large original exit roller is not disen-
gaged completely, move the screw from the
position (A) to (B) and shift the solenoid upward
to adjust the level of the disengegemrnt.
(2) Small original exit solenoid
To install this solenoid, put the end faces of the
bracket and solenoid together. When the small
original reverse flapper is not pulled at com-
pletely, loosen two screws and shift the solenoid
upward to adjust the level of the flapper move-
ment.
(3) Large original exit solenoid
To install this solenoid, put the end faces of the
bracket and solenoid together. When the large
original reverse flapper is not pulled at com-
pletely, loosen the screws and shift the solenoid
upward to adjust the level of the flapper move-
ment.
Ends faced-up
Ends faced-up
Ends faced-up