JUNE 2002 © TOSHIBA TEC
3 - 21
e-STUDIO550/650/810 ADJUSTMENT
Original mode
Items to set
Remarks
Text/Photo
Photo
Text
Code
570
571
572
Range correction for
original manually set
on the original glass
693
694
695
Range correction for
original set on the
RADF
The following are the default values set for each original
mode.
Text/Photo: 12, Photo: 12, Text: 44
Units: Setting for the automatic density mode
Tens: Setting for the manual density mode
1: Value of the background peak - fixed
Value of the text peak - fixed
2: Value of the background peak
- varies depending on image data to be copied.
Value of the text peak - fixed
3: Value of the background peak - fixed
Value of the text peak
- varies depending on image data to be copied.
4: Value of the background peak
- varies depending on image data to be copied.
Value of the text peak
- varies depending on image data to be copied.
3. 4. 4. Setting for range correction for copier
The range correction on the values of the background peak/text peak can be set in the adjustment
mode (05).
If they are fixed, the range correction is performed with standard values.
The values of the background peak and text peak affect the reproduction of the background density and
text density respectively.
The entry procedure of the adjustment value is the same as that for “3.4.1 Image density”.
3. 4. 5. Adjustment of background peak for range correction for copier
The level of the background peak for the range correction is set at the following codes in the adjustment
mode (05).
The entry procedure of the adjustment value is the same as that for “3.4.1 Image density”.
Original mode
Items to set
Remarks
Text/Photo
Photo
Text
Code
532
533
534
Back ground peak
for range correction
When the value is increased, the background (low
density section) of the image becomes not to be output.