JUNE 2002 © TOSHIBA TEC
3 - 19
e-STUDIO550/650/810 ADJUSTMENT
100%
100%
A3
A
XXX
ZZZ
YYY
100%
A3
A
100%
A3
A
100%
A3
A
A3
1
3. 4. Image Quality Adjustment
3. 4. 1. Image density for copier
Perform the image density adjustment in the adjustment mode “05” if the user requests to change the
image density.
Original mode
Items to adjust
Remarks
Text/Photo Photo Text
503
501
504 Manual density center value
The larger the value, the darker the image becomes
Code
505
506
507 Manual density light step value
The larger the value, the lighter the image of the lighter steps become
508
509
510 Manual density dark step value
The larger the value, the darker the image of the darker steps become
514
512
515 Automatic density
The larger the value, the darker the image becomes
Adjust the image density by taking the following procedure while studying the image obtained from the
test copy and the currently entered values.
<Keys used in the operation>
<Display>
Notes: 1. Only one single-sided copy can be made.
2. Since the duplex copying is disabled, make a test copy after
exiting the adjustment mode.
Varies depending on the code “xxx” entered
with the digital keys.
Newly entered
adjustment value
(YYY is the default
display).
Current adjustment value
[0] [5]
[POWER]
Code No.
[Digital keys]: Enter the code.
[START]
Return to
쩸
to make
the adjustment again
TEST MODE
TEST MODE
TEST MODE
WAIT WARMING UP
COPYING
[SET]
or
[INTERRUPT]
: Value “ZZZ” is newly stored in
BC-RAM instead of “YYY”.
[POWER ]OFF/ON:
To exit the
adjustment mode
[ENERGY SAVER]: Test copy
[CLEAR] Corrects the values
[Digital keys]: Enter the adjust-
ment value.