background image

SERVICE MANUAL

  CODE: 00ZAL1041/A1E

            DIGITAL COPIER

AL-10PK
AL-11PK
AL-1010

MODEL

AL-1041

This Srrvice Manual describes only the Printer Interface. For more Information on the AL-1000/1041, please

refer to the AL-1000 Service Documentation.

CONTENTS

SHARP CORPORATION

This document has been published to be used for
after sales service only.
The contents are subject to change without notice.

Parts marked with "    " is important for maintaining the safety of the set. Be sure to replace these parts with specified

ones for maintaining the safty and performance of the set.

[ 1 ]  INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1 - 1

[ 2 ]  MAIN FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1 - 1

[ 3 ]  INSTALLING THE OPTIONAL PRINTER UPGRADE KIT. . . . . . . .  3 - 1

[ 4 ]  INSTALLING THE PRINTER DRIVER SOFTWARE . . . . . . . . . . . .  4 - 1

[ 5 ]  PARALLEL INTERFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4 - 3

[ 6 ]  CIRCUIT DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6 - 1

 

PARTS GUIDE

AL-1041

Summary of Contents for AL-1010 - B/W Laser - Copier













Reviews: