Toshiba e-Studio332s Operator'S Manual Download Page 137

Page: 137 / 183

Error Messages

- 137 -

oubleshooting

Disk Use Failed %FS_ERR%

Please see Help for details.

to Close

Blinks

A disk operation error has occurred.

Please check data.
Message Data Write Error : %CODE%.

Lights up Failure to write message data to be uploaded.

Contact your dealer.

Please check %COLOR% Toner Cartridge.

Please see Help for details.

Lights up Something is wrong with the toner sensor of the

indicated color during printing.
Check that the toner cartridge of the indicated
color is installed properly.

543

Please check %COLOR% Toner Cartridge. :
%ERRCODE%

Please see Help for details.

Blinks

Something is wrong with the toner sensor of the
indicated color.
Check that the toner cartridge of the indicated
color is installed properly.
543 : K

547

Please check %COLOR% Toner Cartridge. :
%ERRCODE%

Please see Help for details.

Blinks

The toner cartridge of the indicated color is not
locked properly.
Check that the lock lever is properly slid to the
left.
547 : K

372
380
381
382
389
390

Paper Jam: %ERRCODE%
Please open the scanner unit and the top
cover.

Please see Help for details.

Blinks

Paper jam has occurred.
Remove the jammed paper.
Error 372 : Misfeed from Duplex
Error 380 : Paper Feed
Error 381 : Transport
Error 382 : Exit
Error 389 : Printing Page Lost
Error 390 : MP Tray
Error 390 : MANUAL

391
392

Paper Jam: %ERRCODE%
Please pull out the paper cassette of the
indicated tray.

Please see Help for details.

Blinks

Paper jam occurred while feeding paper from the
indicated tray.
Remove the jammed paper.
391 : Tray1
392 : Tray2

310
587

Please check the %COVER%.: %ERRCODE%

Please close the %COVER%.

Please see Help for details.

Blinks

The top cover is open.
Close the top cover.
310 : Top Cover
587 : Rear Cover

ADF Cover Open

Please see Help for details.

Blinks

The ADF cover is open.
Close the ADF cover.

Power OFF/ON
%ERRCODE%: Error

Blinks

An error has occurred in the device.
Turn the machine off and then on again.
If the error is not resolved, contact your dealer.

Inspection is required.
%ERRCODE: Error

Blinks

An error has occurred in the device.
Contact your dealer.

Error

code

Message

<Status>

key

Cause/Remedy

Summary of Contents for e-Studio332s























































































































































































Search results

Summary of Contents for e-Studio332s

Reviews:

Related manuals for e-Studio332s

Brands by name

Popular brands

Toshiba e-Studio332s, Operator'S Manual

Search results

Summary of Contents for e-Studio332s

Reviews:

Related manuals for e-Studio332s

Brands by name

Popular brands