Toshiba e-studio205L, Service Handbook, Page: 34 / 672

e-STUDIO205L/255/305/355/455 © 2009 TOSHIBA TEC CORPORATION All rights reserved
SELF-DIAGNOSIS MODES
2 - 6
[5]
A LCF tray-up sensor Tray at upper
limit position
Other than
upper limit
position
B LCF tray-bottom sensor Tray at lower
limit position
Other than
lower limit
position
C LCF end fence stop position sensor Fence stop
position
Other than
stop position
D LCF end fence home position sensor Fence home
position
Other than
home position
E LCF feed side nearly empty sensor Drawer is
nearly empty
Paper present
F LCF paper misfeed detection sensor Normal Paper misfeed
G - - -
H - - -
[6]
A 1st transport sensor (S21) Paper present No paper
B Upper drawer tray-up sensor Tray at upper
limit position
Other than
upper limit
position
C Upper drawer empty sensor No paper Paper present
D Upper drawer nearly empty sensor Drawer is
nearly empty
Paper present
E Upper drawer detection sensor Drawer not
installed
Drawer
present
F - - -
G - - -
H - - -
[7]
A 2nd transport sensor (S14) Paper present No paper
B Lower drawer tray-up sensor Tray at upper
limit position
Other than
upper limit
position
C Lower drawer empty sensor No paper Paper present
D Lower drawer nearly empty sensor Drawer is
nearly empty
Paper present
E Lower drawer detection sensor Drawer not
installed
Drawer
present
F - - -
G - - -
H - - -
[8]
A Bypass feed sensor No paper Paper present
B Bypass feed paper width sensor 0 Refer to table 1
C Bypass feed paper width sensor 1 Refer to table 1
D Bypass feed paper width sensor 2 Refer to table 1
E Bypass feed paper width sensor 3 Refer to table 1
F - - -
G - - -
H - - -
[9]
A - - -
B - - -
C - - -
D - - -
E - - -
F - - -
G - - -
H - - -
Digital
key
Button Items to check
Contents
Highlighted
display
e.g.
Normal
display
e.g.