Toshiba e-studio205L, Service Handbook, Page: 193 / 672

2
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO205L/255/305/355/455
SELF-DIAGNOSIS MODES
2 - 165
5003 Image
processi
ng
Job end cleaning bias
polarity switching
frequency (At jam
recovery)
ALL 3
<0-9>
M Sets when there is any
stain on the back side
of the printed paper
(leading edge) caused
by the transfer roller
after a paper jam is
cleared.
0: Once
1: Twice
2: Three times
3: Four times
4: Five times
5: Six times
6: Seven times
7: Eight times
8: Nine times
9: Ten times
1
5101 Image
processi
ng
Toner cartridge
correction table
switching
ALL 0
<0-2>
M Corrects the image
density according to the
detection value of the
sensor. Changing this
code varies the
correction amount of
the image density. Set
this code when the
density is too high or
low.
0: Middle-level
correction
1: Low-level correction
2: High-level correction
It is hardly corrected at
the normal temperature
and humidity.
1
5130 Image
processi
ng
Developer bias Hi1
correction (hardcopy
security printing)
PRT 128
<0-255>
M Corrects the value of
the developer bias
adjustment (05-205).
4
5131 Image
processi
ng
Main charger bias
correction (hardcopy
security printing)
PRT 128
<0- 255>
M Corrects the value of
the main charger bias
adjustment (05-210).
4
5132 Image
processi
ng
Laser output correction
(hardcopy security
printing)
PRT 128
<0-255>
M Corrects the value of
the laser power
adjustment (05-286).
4
Setting mode (08)
Code
Classific
ation
Items
Functi
on
Default
<Acceptable
value>
Boa
rd
Contents
Proce
dure