manualshive.com logo in svg

Toshiba e-STUDIO GL-1020, Administrator'S Manual, Page: 69 / 323

Share
Download
Toshiba e-STUDIO GL-1020 Administrator'S Manual Download Page 69

01_TARequirements.fm  Modified: 9/19/02
Template Version 1.0 

GL-1020 Administrator’s Guide

69

SYSTEM REQUIREMENTS

Before installing the software, make sure your network and client 
workstations meet the following minimum requirements:

 

Operating System and Networking Requirements

„

Windows

®

 98  

Š

Novell Client v3.1 and Client Service Pack 1 are required 
to run IPX-based SNMP access and Novell printing.

Š

The Microsoft Client for NetWare may be used instead of 
the Novell Client except for NDPS printers.

„

Windows

®

 Me  

Š

Novell Client v3.3 is required to run IPX-based SNMP 
access and Novell printing.

Š

The Microsoft Client for NetWare may be used instead of 
the Novell Client except for NDPS printers.

„

Windows NT

®

 4.0  

Š

Microsoft Service Pack 5 or higher

Š

Novell Client v4.6 or higher with Z.E.N works Starter 
Pack and Service Pack 1 are required to run IPX-based 
SNMP access and Novell printing.

Š

The Microsoft Client for NetWare may be used instead of 
the Novell Client except for NDPS printers.

„

Windows

®

 2000  

Š

Microsoft Windows

®

 2000 Service Pack 1 or higher

Š

Novell Client v4.7 or higher with Z.E.N works Starter 
Pack is required to run IPX-based SNMP access and 
Novell printing.

Š

The Microsoft Client for NetWare may be used instead of 
the Novell Client except for NDPS printers.

„

Windows

®

 XP  

Š

Novell Client v4.82 or higher is required to run IPX-
based SNMP access and Novell printing.

Š

The Microsoft Client for NetWare may be used instead of 
the Novell Client except for NDPS printers.

Summary of Contents for e-STUDIO GL-1020




































































































































































































































































































































Reviews:

No comments