manualshive.com logo in svg

Toshiba e-STUDIO GL-1020, Administrator'S Manual, Page: 251 / 323

Share
Download
Toshiba e-STUDIO GL-1020 Administrator'S Manual Download Page 251

07_ContHardwareErrors.fm  Modified: 9/19/02
Template Version 1.0 

GL-1020 Administrator’s Guide

251

SCAN-RELATED ERROR MESSAGES

Scan-Related LCD Messages

M

ESSAGE

C

ORRECTIVE

 A

CTION

100 sheets can be set on 
the ADF. To continue, 
repeat the operation.

The number of sheets in the ADF has reached the maximum 
(100). Reduce the number of pages and try scanning again

Finish ADF Scan 

Place a document on the ADF.

Finish glass Scan (A 
document is on ADF)

A document on the glass is being scanned. Wait until the 
current scan process is complete before using the ADF scan 
function.

Finish glass Scan (Job full)

The amount of data has reached the maximum. Reduce the 
resolution or change the document type to “Text” or “Text/
Photo” and try scanning again. 

Finish glass Scan (Max 
page reached)

The number of pages has reached the maximum (200) 
pages. Finish the current page and retry scanning the 
remaining pages. 

Invalid Group Password

Enter the correct group number and/or password. 

Job Overflow. Finish ADF 
scan.

The amount of data has reached the maximum. Reduce the 
amount of data by reducing the number of pages, changing 
the resolution, or changing the document type to “Text” or 
“Text/Photo”.

Any data scanned before this error occurred was stored. To 
retrieve the stored data, press Finish.

Job Overflow. To continue, 
repeat the operation.

The amount of data has reached the maximum. Reduce the 
amount of data by reducing the number of pages, changing 
the resolution, or changing the document type to “Text” or 
“Text/Photo”.

Scan kit Internal Error 
(SK1)

Restart the controller. If the controller is not restored, recover 
the HDD. Refer to the GL-1020 

Operator’s Guide (Basic)

. If 

the controller is still not restored, contact your TOSHIBA 
authorized dealer for support.

Scan kit Internal Error 
(SK2)

Restart the controller. If the controller is not restored, recover 
the HDD. Refer to the GL-1020 

Operator’s Guide (Basic)

. If 

the controller is still not restored, contact your TOSHIBA 
authorized dealer for support.

Summary of Contents for e-STUDIO GL-1020




































































































































































































































































































































Reviews:

No comments