Toshiba e-STUDIO GL-1020, Administrator'S Manual, Page: 229 / 323

07_ContGeneral.fm Modified: 9/19/02
Template Version 1.0
GL-1020 Administrator’s Guide
229
CANNOT DISCOVER DEVICE
Problem Description
GL-1020 devices are discovered automatically using SNMP.
When GL-DocMon cannot automatically discover an installed
GL-1020 controller over the network, the most likely cause is
limitations of the protocols on the supporting workstations. In
some cases, you need to add or update network components.
The following checklist helps you identify the source of the error
and directs to you where you can find more information about
resolving it. If the problem persists after you have followed all of
Macintosh Environment
Š AppleTalk and TCP/IP
protocols
Š Peer to Peer
networking
Š Clients running on the
Macintosh platform
1 Is AppleTalk enabled on the
GL-1020 controller?
Next
Step
↓
→
Configuring
AppleTalk
on
page 158.
2 Is TCP/IP set up on the
GL-1020 controller?
Next
Step
↓
→
Configuring TCP/
IP Protocol
Settings
on
page 44.
3 Is the GL-1020 controller
available in the Chooser when
you click on the LaserWriter 8
printer icon?
Next
Step
↓
→
Make sure the
AppleTalk zone is
supported by the
Macintosh client.
4 Can you access any other
network device from the
Macintosh workstation?
Next
Step
↓
→
Refer to your
Macintosh
networking
documentation or
contact Macintosh
technical support.
5 Can another Macintosh
workstation on the network
print to the GL-1020? If so,
compare the settings to
determine which need to be
changed to support printing
from this machine.
End
→
Refer to your
Macintosh
networking
documentation or
contact Macintosh
technical support.
Resolving Network Connectivity and Printing Issues (Continued)
Network
Configuration Check... Yes No
For
Instructions,
Go To...