Home
/
Toshiba
/
e-STUDIO GL-1020
/
Administrator'S Manual

Toshiba e-STUDIO GL-1020, Administrator'S Manual, Page: 244 / 323

Share

Page: 244 / 323

Toshiba e-STUDIO GL-1020 Administrator'S Manual Download Page 244

07_ContHardwareErrors.fm Modified: 9/19/02
Template Version 1.0

244

GL-1020 Administrator’s Guide

Out of Toner

Toner Out icon

If the toner icon is yellow, it indicates the following warning
conditions:

Toner is currently being added.

The toner level is low.

If the toner icon is red, it indicates the following error conditions:

The toner is empty. Refill the toner to resume printing and
copying functions.

The toner bag is full. Replace the bag to resume printing and
copying functions.

Out of Paper

Paper Out icon

The Out of Paper error icon depicts which cassette is empty:
upper, middle, or lower. A paper out condition does not
necessarily terminate a print or copy job. If Auto-select options
are configured, printing and copying may continue by drawing
paper from a different cassette. Refer to the TopAccess online
Help for instructions on setting up Auto-Select mode.

«
...
242
243
244
245
246
...
»

Summary of Contents for e-STUDIO GL-1020




































































































































































































































































































































Reviews:

No comments