Toshiba e-STUDIO GL-1020, Administrator'S Manual, Page: 121 / 323

GL-1020 Administrator’s Guide
121
Template 04_NetworkingWireless.fm
Open Authentication and Shared Key Authentication are the two
authentication modes. The access point and client authentication
modes must match for any communication to take place.
In Open Authentication mode, the AP verifies the client’s identity
regardless of the WEP key, thus the client and the AP will always
associate. Communication takes place only if the WEP keys of
the client and the AP match.
In Shared Key Authentication, the WEP key must match for the
AP to verify and communicate with the client.
SETTING UP A WIRELESS NETWORK USING THE CISCO NIC
Note: The Cisco wireless NIC doesn’t support Extensible
Authentication Protocol (EAP).
Install the wireless NIC and press the
F
ACTORY
D
EFAULTS
button
to initialize the GL-1020 for both the wireless and embedded
Ethernet NICs.
The
WIRELESS
button on the copier’s LCD touch screen and the
wireless settings in TopAccess are only visible when the wireless
NIC is installed.
The following instructions assume that the controller has been
updated with the latest version of the software.
User Interface Settings
The following table shows the user interface options for
configuring wireless networking from the copier’s control panel
and the Administration tab of the web-based TopAccess utility.
UI Controls Type of Control Value Read Write Default
Control Panel TopAccess
Data Rate Text Label in
status area of
front panel Text label 11, 5.5, 2, 1 X (None)
SSID Text field Text field up to 32 characters X X (None)
Network Type Option button List box Infrastructure/
Ad Hoc X X (None)
WEP Security Option button Check box Enabled/Disabled X X (None)
WEP Encryption Option button List box 40 Bits/128 Bits X X (None)
WEP Key
(40 bit) Text Field Text Field 5 * 2 hex characters X (None)
WEP Key (128 bit) Text Field Text Field 13 * 2 hex characters X (None)
Authentication Option buttons List box Open/Shared X X (None)
Default Access
Point Text Field Text Field 6 * 2 hex
(Infrastructure) X X (None)