manualshive.com logo in svg

Toshiba e-STUDIO GL-1020, Administrator'S Manual, Page: 248 / 323

Share
Download
Toshiba e-STUDIO GL-1020 Administrator'S Manual Download Page 248

07_ContHardwareErrors.fm  Modified: 9/19/02
Template Version 1.0 

248

 GL-1020 Administrator’s Guide

Jobs Log 

The following messages may appear in the Status column of the 
Jobs Log. The table indicates the probable cause and the action 
you can take to resolve the error. If the error condition persists, 
contact your TOSHIBA authorized dealer for support.     

Set staple cartridge of 
saddle stitch unit

Set staple cartridge of 
saddle stitch unit

Set the staple cartridge of the 
saddle stitch unit.

Time for periodic 
maintenance

Time for periodic 
maintenance

Time for periodic maintenance. 
Contact your TOSHIBA authorized 
dealer for support.

USE GENUINE TOSHIBA 
TONER

Use genuine 
TOSHIBA Toner

Check and adjust the toner bottle.

WAIT

Wait - Self 
maintenance

Please wait - Self maintenance in 
progress.

Wait adding toner

Wait - Adding toner

Wait - Adding toner.

Jobs Log Status Messages

Message

Cause

Corrective Action

Canceled

Job was cancelled by 
the administrator or 
the end user. 

Resubmit the job. 

Completed

Job printed 
successfully.

No action required. 

Controller Authentication Sig-
nature Not Found

Problem locating or 
communicating with 
the controller. 

Reboot the controller from the 
copier’s control panel or by using 
TopAccess.

Deleted

Job was deleted by 
the administrator or 
the end user.

Resubmit the job.

Message Log Error Messages (Continued)

LCD Message

TopAccess 

Message

Corrective Action

Summary of Contents for e-STUDIO GL-1020




































































































































































































































































































































Reviews:

No comments