Home
/
Toshiba
/
e-STUDIO GL-1020
/
Administrator'S Manual

Toshiba e-STUDIO GL-1020, Administrator'S Manual, Page: 153 / 323

Share

Page: 153 / 323

Toshiba e-STUDIO GL-1020 Administrator'S Manual Download Page 153

04_NetworkingUnix.fm Modified: 9/19/02
Template Version 1.0

GL-1020 Administrator’s Guide

153

INSTALLING THE UNIX TAR FILE

Considerations and Limitations

This print model acts only as a filter and not as a complete
driver. The size and order of the printed pages cannot be
modified.

The GL-1020 UNIX filters do not support the following
engine-supplied features:

Magazine Sort

Saddle-stitch

NUp

Watermarks

Cover Sheets

Sheet Insertion

You must have root privileges to install the required files.

Linux uses the

lptap

command to send a file to a printer.

Since

lp

is not supported in all versions of Linux, the

lptap

command should be used instead.

AIX supports printing using the qdaemon. This can be
invoked by the user with the commands

lp

,

lpr

or

qprt

. In

order to use the GL-1020 filter, either

lp

or

qprt

should be

used.

Supplied Components

net_gl1020

This file is a shell script that will be installed in "/usr/lib/lp/
model/net_gl1020". It contains all the parsing for the
GL-1020 specific commands and it generates all the output
code. Being a shell script a system administrator can modify
it if a site requires any custom options or if other components
are installed in non-standard locations.

lpdsend

This is an executable program that is called by

net_gl1020

to send the print file to the GL-1020 using the LPD protocol.
This program will be installed in /opt/toshiba/tap/bin/
lpdsend.

lpLinux.sh (Linux filter only)

«
...
151
152
153
154
155
...
»

Summary of Contents for e-STUDIO GL-1020




































































































































































































































































































































Reviews:

No comments