Toshiba e-studio 2040c Imaging Manual Download Page 97

Page: 97 / 338

e-STUDIO2040C/2540C/3040C/3540C/4540C

2 - 56

2. Copier-specific Adjustments

2.13 To Obtain a Good Color Balance on Thick Paper

Before the adjustment

After the adjustment

The copy image looks light on thick paper.

The copy image looks darker and sharper even
on thick paper.

Explanation

When image looks light on paper that is different from usual paper, perform automatic calibration for each paper type

to obtain the optimum image quality.

Procedures

* You can start with any of the procedures. But it is recommended to perform the procedures in order, as listed

below. You can use one procedure in conjunction with another. But if this changes the image quality more

than required or loses the effectiveness of the adjustment, restore the settings made in the previously used

procedure to the original ones. Then use other procedures.

* Only the service technician must use procedures (1), (2) and (4).

* Both the service technician and the user can use procedure (3).

Summary of Contents for e-studio 2040c



















































































































































































































































































































































Search results

Summary of Contents for e-studio 2040c

Reviews:

Toshiba e-studio 2040c, Imaging Manual, Page: 97 / 338

Search results

Summary of Contents for e-studio 2040c

Reviews: