Toshiba e-studio 2040c Imaging Manual Download Page 243

Page: 243 / 338

e-STUDIO2040C/2540C/3040C/3540C/4540C

3 - 116

3. Printer-specific Adjustments

3.25.4 To Convert Colors with Specified Source ICC Profiles (Not Using Embedded ICC Profiles)

Explanation

When a user’s RGB images or CMYK images have embedded ICC profiles, the user can ignore the embedded

ICC profiles and apply a different ICC profile previously specified by the user, so that he or she can obtain print

images whose quality is equivalent to that of Fiery images.

Procedures

* Both the service technician and the user can perform all settings.

(1) Create the desired printer profile using the ICC profile creation software.

(2) Access TopAccess and open the "Administration" tab menu. Then upload the desired RGB source profile, CMYK

source profile and printer profile.

•

Follow (a) to (g) below to upload the profiles.

(a) Access TopAccess and open the "Administration" tab menu.

(b) Open the "Setup" menu and the "ICC Profile" submenu.

PS3

XPS

PS3

XPS

Summary of Contents for e-studio 2040c



















































































































































































































































































































































Search results

Summary of Contents for e-studio 2040c

Reviews:

Toshiba e-studio 2040c, Imaging Manual, Page: 243 / 338

Search results

Summary of Contents for e-studio 2040c

Reviews: