Toshiba e-studio 2040c Imaging Manual Download Page 301

Page: 301 / 338

e-STUDIO2040C/2540C/3040C/3540C/4540C

6 - 8

6. Printer-specific Adjustments (GA-1211)

6.1.3 To Calibrate for Thick 2/3/4 (Default Output Profiles and Calibration Sets)

Explanation

Eight Calibration Sets and nine media types are assigned to four profiles in the default setting of the GA-1211.

Four profiles “Plain Profile”, “Thick1 Profile”, “Special1 Profile” and “Special2 Profile” are assigned individually

to nine media types by default. If you would like to calibrate to reproduce more accurate colors according to the

media types, you need to create a custom profile and newly assign a Calibration Set to it.

Media types assigned to each profiles (default)

Media Type

Plain Profile

Thick1 Profile

Specia1 Profile

Special2 Profile

Plain Paper

Recycled Paper

Thick1 Paper

Thick2 Paper

Thick3 Paper

Thick4 Paper

Transparency

Special1 Paper

Special2 Paper

“Thick1 Profile” is assigned to Thick 2, 3 and 4, and “Plain Profile” is assigned to Recycled Paper, and each of

them is shared with Thick 1 and Plain Paper individually by default. Therefore calibration for each media type

such as Thick 2/3/4 or Recycled Paper is not possible in the default setting. To perform calibration for each media,

follow the procedure below.

1. Create an output profile for Thick 2/3/4 or Recycled Paper.

2. Assign a Calibration Set for the media type to the created output profile.

This section describes a procedure for creating an output profile exclusively for Thick 2 by copying the profile of

Thick 1.

Procedures

* Both the service technician and the administrator can use all the procedures.

* All the adjustments will be effective only when images are printed with a PS3 printer driver in the Full color

mode.

(1) Start up the ColorWise Pro Tools or Command WorkStation 5.x, and then open the Profile Manager.

(2) Select the profile of Thick1.

(3) Click [Edit] at the top right of the screen of the Profile Manager.

• Color Editor is opened and a screen for editing the selected profile appears.

(4) Edit the profile if required, or click [Save] if no edit is required.

• The Save screen appears.

Summary of Contents for e-studio 2040c



















































































































































































































































































































































Search results

Summary of Contents for e-studio 2040c

Reviews:

Toshiba e-studio 2040c, Imaging Manual, Page: 301 / 338

Search results

Summary of Contents for e-studio 2040c

Reviews: