Toshiba e-studio 2040c Imaging Manual Download Page 328

Page: 328 / 338

e-STUDIO2040C/2540C/3040C/3540C/4540C

6 - 35

6. Printer-specific Adjustments (GA-1211)

(3) Select areas to be printed only with K toner in “Print gray using black only (RGB)”.

• Off:

All the gray areas are printed with four toners (C, M, Y and K).

• Text/Graphic:

The gray areas of text and line arts (graphics) are printed only with K toner.

• Text/Graphic/Image: All the gray areas are printed only with K toner.

Precautions after the completion of the adjustment

When color photographs are printed only with K toner, the printed images may look rougher. In order to avoid this,

check the printed images carefully and adjust them.

Summary of Contents for e-studio 2040c



















































































































































































































































































































































Search results

Summary of Contents for e-studio 2040c

Reviews:

Toshiba e-studio 2040c, Imaging Manual, Page: 328 / 338

Search results

Summary of Contents for e-studio 2040c

Reviews: