Toshiba e-studio 2040c Imaging Manual Download Page 62

Page: 62 / 338

e-STUDIO2040C/2540C/3040C/3540C/4540C

2 - 21

2. Copier-specific Adjustments

To make another adjustment of the background for Full color after the above adjustment

* Adjust the density level while checking the color balance since it may differ from that of the original after

the adjustment.

Color mode

Original mode

[05] code

Recommended

value

Acceptable

value range

Defa

ult

Text/Photo 05-7744

Text 05-7745

Full color / Auto color

(when judged as color)

Printed Image

05-7746

Photo 05-7747

Map 05-7748

"Full color

<Automatic

adjustment>"

User custom

05-7762

Text/Photo 05-7749

Text 05-7750

Full color / Auto color

(when judged as color)

Printed Image

05-7751

Photo 05-7752

Map 05-7753

Full color

User custom

05-7763

Set 128 or larger.

0 to 255

128

* The value for automatic adjustment will be applied only if the automatic copy density mode is selected.

On the other hand, the value for manual adjustment will be applied only if the manual copy density mode

is selected.

* Set the value in increments of approximately 10, while checking the copy image until the optimum value is

obtained.

<Note>

"Making the highlighted area more visible (or increasing the background density)" and

"eliminating the background color (or decreasing the background density)" are mutually

contradictory. If the background color is darkened to make the highlighted area more visible,

the hue of the background may change.

After adjusting the background density, copy and check the copy image quality.

If further image quality adjustments are still necessary, use the next procedure.

(3) Press the [BASIC] button on the Control Panel. Press the [

] button to increase the copy density.

After increasing the copy density, copy and check the copy image quality.

With the copy density set to the maximum, if further image quality adjustments are still necessary, the

service technician must use the next procedure.

Summary of Contents for e-studio 2040c



















































































































































































































































































































































Search results

Summary of Contents for e-studio 2040c

Reviews:

Toshiba e-studio 2040c, Imaging Manual, Page: 62 / 338

Search results

Summary of Contents for e-studio 2040c

Reviews: