Toshiba e-studio 2040c Imaging Manual Download Page 178

Page: 178 / 338

e-STUDIO2040C/2540C/3040C/3540C/4540C

3 - 51

3. Printer-specific Adjustments

Mac

For Macintosh

* This adjustment will have an effect only on full-color printing.

Open the print dialog box. Set the value for "Sharpness" within a range of "1" to "4."

• Setting "+4" provides the sharpest print image.

* Initially, set "4" and check the printout. If further image quality adjustments are still necessary, refer to

<Hint> to do this.

* The menu to select varies according to the operating system. Refer to the table below and select the menu.

Menu

10.2.x "Printer

Features"

"Feature Sets: Color settings 4"

"Sharpness"

10.3.x / 10.4.x/10.5x

"Color Settings 2"

"Sharpness"

<Hint>

In addition to the sharpness adjustment, decreasing "Brightness" (moving to the [-] side),

changing "Contrast" or increasing "Saturation" (moving to the [+] side) may improve the image

quality.

After changing the option on the printer driver, print and check the print image quality.

If further image quality adjustments are still necessary, use the next procedure.

Summary of Contents for e-studio 2040c



















































































































































































































































































































































Search results

Summary of Contents for e-studio 2040c

Reviews:

Toshiba e-studio 2040c, Imaging Manual, Page: 178 / 338

Search results

Summary of Contents for e-studio 2040c

Reviews: