Toshiba e-studio 2040c Imaging Manual Download Page 52

Page: 52 / 338

e-STUDIO2040C/2540C/3040C/3540C/4540C

2 - 11

2. Copier-specific Adjustments

(4) Perform color balance adjustment or RGB adjustment to adjust the tint of colors in general.

•

Use steps (a) through (d) to perform the adjustment.

(a) Press the [IMAGE] button on the Control Panel.

(b) Press the [COLOR BALANCE] button to adjust the color balance by changing the amount of toner

(C, M, Y and K) or the [RGB ADJUSTMENT] button to adjust the color balance by changing the

intensity of R, G and B.

* After selecting the color balance by changing the amount of toner (C, M, Y and K), press the

[DETAIL] button. The tint of the color can be adjusted according to density area (low-, medium-

or high-density area).

(d) Press the [ENTER] button.

After adjusting the tint of the colors, copy and check the copy image quality.

If further image quality adjustments are still necessary, use the next procedure.

(5) Enter adjustment mode [05]. Change the values for codes [7960 to 7979] to adjust the color density.

Color to

adjust

Original mode [05] code Subcode

Recommended value

Acceptable

value range

Default

Text/Photo 05-7960

0/1/2

Text 05-7961

0/1/2

Printed image

05-7962

0/1/2

Photo 05-7963

0/1/2

(Yellow)

Map 05-7964

0/1/2

Text/Photo 05-7965

0/1/2

Text 05-7966

0/1/2

Printed image

05-7967

0/1/2

Photo 05-7968

0/1/2

(Magenta)

Map 05-7969

0/1/2

Text/Photo 05-7970

0/1/2

Text 05-7971

0/1/2

Printed image

05-7972

0/1/2

Photo 05-7973

0/1/2

(Cyan)

Map 05-7974

0/1/2

Text/Photo 05-7975

0/1/2

Text 05-7976

0/1/2

Printed image

05-7977

0/1/2

Photo 05-7978

0/1/2

(Black)

Map 05-7979

0/1/2

Set a value larger than 128
to increase the density.

Set a value smaller than 128
to decrease the density.

0 to 255

128

* Set the value in increments of approximately 10, while checking the copy image until the optimum value is

obtained.

* The value for the code corresponding to the original mode (Text/Photo, Text, or Printed image) will affect

the copy image quality in the Full color mode and the Auto color mode.

* The subcode varies according to the area where the density is adjusted. Refer to the table below and set

the subcode for the area to be adjusted.

Subcode

Area where the density is adjusted

0 Low-density

area

1 Medium-density

area

2 High-density

area

Summary of Contents for e-studio 2040c



















































































































































































































































































































































Search results

Summary of Contents for e-studio 2040c

Reviews:

Toshiba e-studio 2040c, Imaging Manual, Page: 52 / 338

Search results

Summary of Contents for e-studio 2040c

Reviews: