Toshiba e-studio 2040c Imaging Manual Download Page 284

Page: 284 / 338

e-STUDIO2040C/2540C/3040C/3540C/4540C

5 - 13

5. Scanning-specific Adjustments

Procedures

* You can start with any of the procedures. But it is recommended to perform the procedures in order, as listed

below. You can use one procedure in conjunction with another. But if this changes the image quality more

than required or loses the effectiveness of the adjustment, restore the settings made in the previously used

procedure to the original ones. Then use other procedures.

* Both the service technician and the user can use procedure (1).

* Only the service technician must use procedure (2).

(1) When scanning the original, press the [SCAN SETTING] button on the Control Panel. Press the [+] button

to increase the sharpness intensity.

After increasing the sharpness intensity, scan the original and check the scanned-in image quality.

With the sharpness intensity set to the maximum, if further image quality adjustments are still necessary, the

service technician must use the next procedure.

(2) Enter adjustment mode [05]. Change the values for codes [8335 to 8337 and [7430 to 7433] to adjust the

sharpness intensity.

Color mode Original mode [05] code

Recommended value

Acceptable

value range

Default

Text/Photo 05-7430

Text 05-7431

Black

Photo 05-7432

Text 05-8335

Printed image

05-8336

Full color

Photo 05-8337

Gray scale

---

05-7433

Set a value larger than 128.

0 to 255

128

Setting "0" provides the softest image, while setting "255" provides the sharpest image.

Precautions after the completion of the adjustment

The adjustment may possibly cause moiré. In addition, when text and thin lines in a light-colored background

are scanned, the background around the text or line may be eliminated. Therefore, carefully perform the

adjustment, while checking the scanned-in image.

Summary of Contents for e-studio 2040c



















































































































































































































































































































































Search results

Summary of Contents for e-studio 2040c

Reviews:

Toshiba e-studio 2040c, Imaging Manual, Page: 284 / 338

Search results

Summary of Contents for e-studio 2040c

Reviews: