manualshive.com logo in svg

Toshiba e-studio 2040c, Imaging Manual, Page: 67 / 338

Share
Download
Toshiba e-studio 2040c Imaging Manual Download Page 67

 

e-STUDIO2040C/2540C/3040C/3540C/4540C 

© 2011 TOSHIBA TEC CORPORATION All rights reserved 

2 - 26 

2. Copier-specific Adjustments  

2.6.2  To Adjust the Copy Image Quality in the Full Color Mode 

 
* You can start with any of the procedures.  But it is recommended to perform the procedures in order, as listed 

below.  You can use one procedure in conjunction with another.  But if this changes the image quality more 
than required or loses the effectiveness of the adjustment, restore the settings made in the previously used 
procedure to the original ones.  Then use other procedures. 

* Both the service technician and the user can use procedures (1) and (4). 
* Only the service technician must use procedures (2) and (3). 

 

 
(1)  Press the [AUTO] button on the Control Panel to select the automatic density adjustment. 
 
(2)  Press the [IMAGE] button on the Control Panel.  Press the [BACKGROUND ADJUSTMENT] button. 

Press the [LIGHT] button to decrease the background density. 

 
 

After decreasing the background density, copy and check the image quality. 

 

With the background density set to the minimum, if further image quality adjustments are still necessary, the 
service technician must use the next procedure. 

 
(3)

 

Enter the adjustment mode [05]. Change the values for the following codes below to adjust the density level 
of the background. 

Adjustment 

Original mode [05] code Recommended value 

Acceptable 

value range

Default

Text/Photo 05-7656 

Text 05-7657 

Full color / Auto color 

(when judged as color) 

Printed image

05-7658 

Photo 05-7659 

Map 05-7660 

Full color 

User custom 

05-7661 

Set a value larger than 

128. 

0 to 255 

128 

 

To make another adjustment of the background for Full color after the above adjustment 

* Adjust the density level while checking the color balance since it may differ from that of the original after 

the adjustment. 

Adjustment 

Original mode [05] code Recommended value 

Acceptable 

value range

Default

Text/Photo 05-7744 

Text 05-7745 

Full color / Auto color 

(when judged as color) 

<Automatic 

adjustment> 

Printed image

05-7746 

Photo 05-7747 

Map 05-7748 

Full color 

<Automatic 

adjustment> 

User custom 

05-7762 

Text/Photo 05-7749 

Text 05-7750 

Full color / Auto color 

(when judged as color) 

<Manual adjustment> 

Printed image

05-7751 

Photo 05-7752 

Map 05-7753 

Full color 

(when judged as color) 

<Manual adjustment> 

User custom 

05-7763 

Set a value larger than 

128. 

0 to 255 

128 

 
 
 

Summary of Contents for e-studio 2040c



















































































































































































































































































































































Reviews:

No comments