Toshiba e-studio 2040c Imaging Manual Download Page 114

Page: 114 / 338

e-STUDIO2040C/2540C/3040C/3540C/4540C

2 - 73

2. Copier-specific Adjustments

2.18To Program Frequently Used Copy Settings

(To Use Custom Mode)

Explanation

Five original modes (Text/Photo, Text, Printed image, Photo and Map) are available for the color modes and

four original modes (Text/Photo, Text, Photo and Image smoothing) are available for the black mode by default.

However, a new original mode adjusted to be able to satisfy the user’s particular requests about image quality

can be added as a “custom” mode. One custom mode can be added for each of the color and black modes. For

users who frequently use the special type of originals or who are not satisfied with the image quality of the

existing original modes, it is recommended to register a set of copy settings that satisfy the user’s particular

requests as the custom mode.

* The custom mode is made by adjusting image quality based on the Text/Photo mode, according to originals to

be used. It is also available to use the custom mode as an independent original mode. This means that the

change of the setting values in the custom mode does not affect each default original modes.

Procedures

The adjustment procedure differs depending on whether in the black mode or the full color mode the settings in

the custom mode are adjusted. Ask the user which mode he or she uses and then refer to the procedure that is

more suitable for his or her request.

2.18.1 To Adjust Custom Mode Settings in Black Mode

* All the steps in the adjustment procedure shall be performed by the service technician.

(1) Enter the setting mode [08]. Change the value for the code [7401] to enable the functions of the custom

mode in the black mode.

Value for 08-7401

Custom mode for black mode

0 Unused

Used (Text/Photo base)

2 Used

(Text

base)

Used (Photo base)

* The default adjustment value for the custom mode is preset at the one that reproduces the image quality

equivalent to that of Text/Photo in the black mode at the time of shipment.

After setting the value, go to the next step.

Summary of Contents for e-studio 2040c



















































































































































































































































































































































Search results

Summary of Contents for e-studio 2040c

Reviews:

Toshiba e-studio 2040c, Imaging Manual, Page: 114 / 338

Search results

Summary of Contents for e-studio 2040c

Reviews: