Toshiba e-studio 2040c Imaging Manual Download Page 205

Page: 205 / 338

e-STUDIO2040C/2540C/3040C/3540C/4540C

3 - 78

3. Printer-specific Adjustments

Mac

For Macintosh

Open the print dialog box. Enable the "Do not Print Blank Pages" option.

* The menu to select varies according to the operating system. Refer to the table below and select the menu.

Menu

10.2.x "Printer

Features"

"Printing Modes"

"Do not Print Blank Pages"

10.3.x / 10.4.x/10.5x

"Print Mode"

"Do not Print Blank Pages"

Precautions after the completion of the adjustment

The adjustment may not possibly operate the following options as programmed. Therefore, pay special attention

to the combination of options.

• Booklet printing

• N-up printing

• Use Front Cover

• Use Back Cover

• Interleave Pages

Remarks

If any data are inserted in the header or footer of a particular page on Excel or Word, even though no data are

present in the body, the page will not be recognized as a blank page. The header or footer will be printed out.

Summary of Contents for e-studio 2040c



















































































































































































































































































































































Search results

Summary of Contents for e-studio 2040c

Reviews:

Toshiba e-studio 2040c, Imaging Manual, Page: 205 / 338

Search results

Summary of Contents for e-studio 2040c

Reviews: