Toshiba e-studio 2040c Imaging Manual Download Page 106

Page: 106 / 338

e-STUDIO2040C/2540C/3040C/3540C/4540C

2 - 65

2. Copier-specific Adjustments

2.16.1 To Adjust the Tint of Colors other than Black

* Both the service technician and the user can perform all adjustments.

(1) Press the [IMAGE] button on the Control Panel. Press the [TWIN COLOR COPY] button.

Select the Twin-color copy mode from among the twin color copy mode options.

• To select Red and black mode:

Press the [RED & BLACK] button.

• To select the Twin-color selectable mode:

Use steps (a) through (d) to select the Twin-color selectable mode.

(a) Press the [TWIN COLOR SELECTABLE] button.

(b) Press the [CHANGE BLACK TO] button. Press the button for the desired color.

(d) Press the [ENTER] button.

Use procedure (2).

(2) Press the [ADJUST] button. Press the [+] button or the [-] button for the color to be adjusted, in order to

adjust the tint of colors other than black.

• In the Red and black mode:

• Press the [-] button to decrease yellow and the [+] button to enhance magenta, in order to enhance the

tint of red.

• Press the [+] button to enhance yellow and the [-] button to decrease magenta, in order to decrease the

tint of red.

• In the Twin-color selectable mode:

Press the [+] button to enhance the tint of the color or the [-] button to decrease it.

* Press the [DETAIL] button. The tint of the color can be adjusted according to the density area (low-,

medium- or high-density area).

Precautions after the completion of the adjustment

Nothing in particular.

Summary of Contents for e-studio 2040c



















































































































































































































































































































































Search results

Summary of Contents for e-studio 2040c

Reviews:

Toshiba e-studio 2040c, Imaging Manual, Page: 106 / 338

Search results

Summary of Contents for e-studio 2040c

Reviews: