Toshiba e-studio 2040c Imaging Manual Download Page 319

Page: 319 / 338

e-STUDIO2040C/2540C/3040C/3540C/4540C

6 - 26

6. Printer-specific Adjustments (GA-1211)

Explanation

To change colors in printouts according to the user’s request, normally operations from 1 to 4 below must be

repeated, resulting the reduction of adjustment efficiency.

1. Adjust the CMYK Simulation Profile or Output Profile setting according to the user’s request using Color

Editor.

2. Name the adjusted setting, and then save and register it.

3. Print with the registered setting and then check the colors on printouts.

4. If the colors are not printed as in the way the user has requested, repeat the operation from 1 to re-adjust it.

In this case, the adjustment of the profile and the checking of colors can be performed simultaneously with Color

Editor by holding the image file in the hold queue of the Command WorkStation. (However, only one file can be

checked and stored in the hold queue.)

Procedures

* Perform the adjustment in accordance with the procedures below.

* Both the service technician and the administrator can use all the procedures.

* All the adjustments will be effective only when images are printed with a PS3 printer driver in the Full color

mode.

* Command WorkStation and ColorWise Pro Tools must be installed in a computer in order to perform procedures

(1) to (6) below.

* The menus of ColorWise Pro Tools on Macintosh are displayed as in the almost same manner as those for

Windows OS. Therefore only the menus on Windows OS are introduced in this section. Note that ColorWise Pro

Tools must be operated under administrator privilege.

* Adjustable files are limited to PS files or EPS files. Also, if PPD data are attached to a PS file printed from a

common application, the information of the PPD data will be given priority. Therefore be sure to delete PPD data

of the PS file in advance following the procedure (6) below.

(1) Start up Command WorkStation.

(2) Open a file to be used from an application on a client computer.

(3) Click [Print] on the [File] menu of the application.

• A dialog box for printing appears.

* Note that the name of each menu may differ depending on the applications.

(4) Select “GA-1211” as a printer name. Then check [Output to file], and then click [Properties].

• The printer driver of the GA-1211 appears.

* Note that the name of each menu may differ depending on the applications.

Summary of Contents for e-studio 2040c



















































































































































































































































































































































Search results

Summary of Contents for e-studio 2040c

Reviews:

Toshiba e-studio 2040c, Imaging Manual, Page: 319 / 338

Search results

Summary of Contents for e-studio 2040c

Reviews: