Toshiba e-studio 2040c Imaging Manual Download Page 234

Page: 234 / 338

e-STUDIO2040C/2540C/3040C/3540C/4540C

3 - 107

3. Printer-specific Adjustments

(6) Uncheck "Apply to Device Color Only".

(7) Print a color measurement patch to be used on the ICC profile creation software.

(8) Create the ICC profile following the operational procedure provided by the ICC profile creation software.

Caution after the adjustment

Nothing in particular.

Remarks

• Read the precautions provided by the ICC profile creation software carefully before starting printing.

• The correct image may not be printed on some paper types that are out of the MFP’s specifications.

PS3

XPS

PS3

XPS

PS3

XPS

Summary of Contents for e-studio 2040c



















































































































































































































































































































































Search results

Summary of Contents for e-studio 2040c

Reviews:

Toshiba e-studio 2040c, Imaging Manual, Page: 234 / 338

Search results

Summary of Contents for e-studio 2040c

Reviews: