Toshiba e-studio 2040c Imaging Manual Download Page 310

Page: 310 / 338

e-STUDIO2040C/2540C/3040C/3540C/4540C

6 - 17

6. Printer-specific Adjustments (GA-1211)

(6) The Properties menu of the printer driver appears. Click the [Color] icon from the Print Option, and then click

[Expert Settings]. Then select “None” for [CMYK Simulation Profile] so as not to start simulation.

* Do not mix with the settings for ColorWise Off.

(7) If the media type must be changed, reset the Media Type of the [Media] tab menu. Also be sure to set the size

of media with the “Page Size” setting.

(8) After setting all of the above, print the file “Custom21.ps”.

(9) The test pattern “Custom21.ps” is printed.

(10) Start up the Calibrator, and then click [Measure] of “Get Measurements” to measure the printed pattern.

Summary of Contents for e-studio 2040c



















































































































































































































































































































































Search results

Summary of Contents for e-studio 2040c

Reviews:

Toshiba e-studio 2040c, Imaging Manual, Page: 310 / 338

Search results

Summary of Contents for e-studio 2040c

Reviews: